This boat was designed and built by Robert Wallace between October 2001 and May 2002. He launched her in May on White Oak Pond in northeastern Pennsylvania. The skiff has a 10' LOA and maximum beam of 39". She is a semi-V hull.

Dick Harrington built this Iain Oughtred-designed Acorn skiff for Dave Clarke. Her overall length is 8' and she can be rowed or sailed. The skiff was built of okoume plywood.

Doyle Herman started restoration of this 15' Wagemaker in September of 2001. He launched it in May 2002. He stripped the boat to a bare hull, replaced the deck plywood and part of the transom. Wolverine Boats of Grand Rapids, MI built the boat in 1957.

In 2002, Sal Balsamo built this Ninigret V-bottomed bassboat designed by Atkin Boats of Noroton, CT. Sal used 3/8" okoume plywood planking over white oak frames fastened with bronze screws.

Tim White of the Maritime Aquarium in Norwalk, Connecticut, writes, that this boat was part of classes run at the boatshop and started in September 2001. We used the original one page drawing obtained from Mystic Seaport of the Cape Anne Dory dated 1939.

Ken Foote built TRUANT using Edwin Monk's book How to Build Wooden Boats. TRUANT is a 12'6" catboat with 5'beam. He launched her in September of 2002. He used poplar for the bottom and sides, cypress and cottonwood for the trim.

Rich Gaito is seen here sailing JAYLENE KERR off Merchant Island, just south of Stonington, Maine. JAYLENE KERR is a Joel White Shearwater design (16' x 53" beam) that Rich built during the winter of 2001-2002. He used plywood lap construction on laminated frames.

Stephan Bradley writes that his Rob Roy 13' cedar-strip canoe was inspired by Nick Schade's book, "The Strip-Built Sea Kayak," and a design by Ted Moores and Steve Killing at Bear Mountain Boats, www.bearmountainboats.com.

Matt Zarem used stitch-glue mahogany marine plywood to build this 16' sea kayak, SCOUT, which he launched in March of 2002. It is a CLC Chesapeake 16 design, with an overall length of 15'8" and beam of 231/4". Matt writes that it is an excellent boat for traveling around San Francisco Bay.

Dom Zack of Waterbury, VT built this boat for his grandsons, Colin and Anthony, who live on the Indian River in Melbourne, FL. They launched it on the 25 of March 2002. It is a Footloose Beach Cruiser designed by Jordan Wood Boats. He used 3/8" and 1/4" marine plywood with frames made of fir.