Rod built this boat for his friend, Roger Hudson or Beacon Bay, South Africa, during a trip to an ecovillage in South Africa in the summer of 2002. With only a table saw, cordless drill and a few hand tools, he built TRIPLE E out of a sheet of Meranti plywood.

Aaron Avery built a Ken Swan Nez Perce 13 design 13'6" outboard fishing skiff in his garage. He used marine plywood and vertical grain Douglas fir. The boat is powered by a 1956 10-hp Johnson outboard.

ABIGAIL is a 'very enjoyable rowing boat" writes owner and builder Peter Kobylarz of Houlton, ME. She is a Grand Banks Dory found in John Gardner's Dory Book. Peter constructed her of hand-planed native pine.

David Jarrett rescued this boat and spent one year restoring it, before launching it in July 2002. It had been in storage for years, and had numerous layers of paint and varnish to be removed. He refinished the hull and replaced the seats and floors.

Rob Hess launched this Cosine Wherry designed by John Hartsock on June 30, 2002. He rows and motors WINNIE around the waters of Webster, NY.

Doug Robertson named this canoe BOING for the noise it will make if all the strips come apart. It is a modified Bear Mountain Rob Roy Canoe. The 13' design was shortened to 11' 6". It weighs 26 pounds. Doug used cedar bead and cove strips covered on the outside with 5 oz fiberglass.

LAURIE-ANN, a 20' cat-ketch is shown here at her launching in June 2002 on St. John's River in Palatka, FL. Pat Kelly built her from a Graham Byrnes design. He used stictch and glue construction on okoume plywood. Her shallow draft, only 8" with the board up, makes her fun and fast.

Tom Wignall of Lakeville, MN is seen here sailing his new Arch Davis Sand Dollar design BAY DAWG on Pelican Lake in Breezy Point, MN. BAY DAWG, launched in June 2002, is 11'6" with a 42" beam. He constructed her with mahogany planking on oak and cedar frames, covered with System 3 epoxy.

Kurt and Joan Magnusson restored this rowboat and re-launched it the summer of 2002. They found the boat at a yardsale in NH and bought it for $20. They replaced 11 ribs and all of the fastenings. They hired Skylar Thomson of Thomson Canoeworks in Connecticut to recanvas the boat.

This 1922 17' Old Town canoe was restored by Dave Millikan of Inverness, FL. It is Model HW, Grade CS, Serial No. 67358, and had been delivered to Abraham and Strauss back in 1922. Dave found it in storage in the Adirondacks in 2001.