This 12'2' sailing trimaran started life as a canoe sometime around 1910. Ron Mulloy of Randolph, NJ obtained the canoe in 2001 and started construction by cutting 5' off the original length, then spent the next 4 summers rebuilding her, and adding kick-up leeboards and rudder.
Tom Taylor's life long ambition was to design and build his own boat, and this 20-9" cuddy cabin runabout finally fulfilled that dream. Powered by a Mercury 90 hp four-stroke engine, it has a mahogany hull with lapstrake construction.
Using John Gardner's Dory Book for instruction and inspiration, G++nter Voss built this 16-foot dory for his grandchildren to use, based on Gardner's 18-foot Light Dory. Voss modified the sheer and the top of the transom, and added a centerboard and a small lug rig.
Kjell Klinkenberg of Oslo, Norway, finished two boats in the summer of 2004: a 18' x 25" Cape Charles kayak (CLC designs) and a 16' x 4'5" Shearwater (Joel White). The boys in the pictures are his son Oyvind on the right, and his friend, Inge Svale. Kjell is at the helm.
Stephanie Alley launched this flat bottom skiff, PYXIS, on July 17, 2004. The design for PYXIS is based on the skiff SILAS by J. A. Emmett and was built by Sam Temple of Blue Hill, ME. It is built of cedar planking on whiteoak frames.
William Bliss, his wife, and five children made the construction of this boat a family project. It took 6 years from 1998 to 2004. SGT. MULVANEY is a 10' Classic Dinghy designed by John Clark of Compumarine in Rio Rico, AZ. The dinghy is strip-planked with western red cedar.
Bob Arant built this 16' Meadow Bird sailboat using plans from GFC Boats, 490 Hagan Road, Cape May Courthouse, NJ 08210. SAY WHEN, has a strip-planked hull, and was launched July 2004 in Omaha, Nebraska. Contact Bob at 13615 N. 42nd Street, Omaha, NE 68112.
This 17' Arctic Tern Kayak is Matt FitzGibbon's second boat. He built it from a kit by Pygmy Boats, Port Townsend, WA 98368. His children contributed to the building effort. He recommends the book Kayaks You Can Build by Ted Moores and back issues of WB for other would-be builders.
Rich Hanenburg dedicated more than 5000 hours over 6 years to the construction of his 28' Nordcoaster called HOHUM. The hull and cabin are made from plywood, with framing in mahogany, fir, and oak; then Rich covered the entire boat with fiberglass and epoxy.
Nick Riggio built the GERRYLU, a Steve Redmond Whisp design, from Meranti plywood, cypress wood, and mahogany. Nick was a student at Greg Rossel's WB School Fundamentals of Boatbuilding class in the summer of 2002. GERRYLU is 15'7" x 3'6" and is used on the lakes near Webster Groves, MO.