Doug Robertson named this canoe BOING for the noise it will make if all the strips come apart. It is a modified Bear Mountain Rob Roy Canoe. The 13' design was shortened to 11' 6". It weighs 26 pounds. Doug used cedar bead and cove strips covered on the outside with 5 oz fiberglass.

LAURIE-ANN, a 20' cat-ketch is shown here at her launching in June 2002 on St. John's River in Palatka, FL. Pat Kelly built her from a Graham Byrnes design. He used stictch and glue construction on okoume plywood. Her shallow draft, only 8" with the board up, makes her fun and fast.

Tom Wignall of Lakeville, MN is seen here sailing his new Arch Davis Sand Dollar design BAY DAWG on Pelican Lake in Breezy Point, MN. BAY DAWG, launched in June 2002, is 11'6" with a 42" beam. He constructed her with mahogany planking on oak and cedar frames, covered with System 3 epoxy.

Kurt and Joan Magnusson restored this rowboat and re-launched it the summer of 2002. They found the boat at a yardsale in NH and bought it for $20. They replaced 11 ribs and all of the fastenings. They hired Skylar Thomson of Thomson Canoeworks in Connecticut to recanvas the boat.

This 1922 17' Old Town canoe was restored by Dave Millikan of Inverness, FL. It is Model HW, Grade CS, Serial No. 67358, and had been delivered to Abraham and Strauss back in 1922. Dave found it in storage in the Adirondacks in 2001.

Reuel Kaighn named this 34' full keel sloop after his father-in-law, John Lord, a naval architect and marine engineer. JL is a James B. DeWitt one-design, built by him in 1950 in Oakland, CA. She spent nearly ten years in storage, before being restored at Shotwell Boatyard, in Nescopeck, PA.

Bruce Porter writes "Bruce Porter built this 13'2" x 50" Jimmy skiff with help from Madison East High School Woodworking Students and staff. Launched May 31st, 2002, the skiff will be used on Madison Wisconsin area lakes and rivers.

From the Hill School Press Release " Instructor of woodworking, Luke Block, and his class at The Hill School of Pottstown, PA built 16 CLC 17 LT Sea kayaks. The boats were first launched on the Hill's own Dell Pond in late May 2002, as the opening feature of the school's year-end art exhibit.

Jun'ichi launched KIRI, a 15'6" pulling boat designed by William Atkin in May 2002. He uses KIRI (Japanese for 'mist') in the waters near Victoria, BC. KIRI is equipped with three rowing stations and a 4-hp Evinrude for propulsion.

MARILYN D has a 26' hull of intact cold-molded spruce. She was originally called IMPULSE and owned by Cabot Lyman, who used it as a commuter boat for 10 years, and was the original 'Jet' boat out of Lyman Morse. Mike Perlis and Lyman Morse restored her over the winter of 2001-2002.