If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the FEATURED BOATS MUST BE BUILT OF WOOD.
To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
Easy to Build Flat Bottom Skiff 18 ft Instructions also Include Our 14 Ft Smaller Version
The Solo Packette is designed for those searching for pack canoe that they can carry to even through the most difficult approaches.
Miniature voyaging and cruising yacht for amateur boatbuilders, can carry two, capable of short blue water voyages.
A fast and able auxiliary cruiser with wheel steering and accommodations for three.
Construction: Carvel Planked over steamed frames.
Alternative construction: Cold-molded or strip.
Lofting is required.
Plans include 5 sheets.
Techne is a pure double trapeze skiff, fast, exciting and for amateur boat building.
“Breeze” is a 10′ (3m) double paddle canoe. Two sheets of plywood needed. Stitch and glue construction using 3″(75mm) fiberglass tape in epoxy for all seams inside and out. The deciding factors when designing the boat were mostly the same as with all my designs - seaworthiness and lightweight.
The lines for this canoe were taken from an original ‘Huron’ built in cedar/canvas by the Peterborough Canoe Company. It was a second grade model in a series of Cruiser canoes that measured from 16′ x 33″ to 18′ x 37″.
Scherzando is a 12'10'' open canoe. The construction technique is a wooden basquet whith a canvas skin coated with epoxy or polyester. The plans include 7 station moulds, bow and stem at full escale.
This boat is a larger version of my popular POINT COMFORT 18, a traditional Chesapeake Bay workboat type reinterpreted for simpler and more modern construction.
This double-ended sloop combines genuine tradition and modern performance.
Construction: Glued-lapstrake plywood over laminated frames.
Lofting is required.
Plans include 4 sheets.
Believe to be second hull built to the design after the Hiscock’s first circumnavigation, launche
1938 Hinkley Islander Sparkman & Stephen’s design.
Custom built cruising sailboat constructed with a 1 1/8″ thick spruce, edge nailed, strip-planked
A kit boat from Russell Brown’s Port Townsend Watercraft, designed by Bieker Boats.
