If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the FEATURED BOATS MUST BE BUILT OF WOOD.
To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
Construction - Glued lapstrake clinker plywood. No Lofting required. Plans include 7 sheets with photocopies of Classic Boat building series. Sail Area - 67 sq. ft.
An entry-level sliding-seat pulling boat. Provides rewarding speed in an easily built hull with enough stability to keep a beginner out of trouble. Construction: Plywood. No lofting is required. Plans include 5 sheets.
24′ Chesapeake Bay Hampton FlattieL.O.A.: 24′ 2″L.W.L.: 22′ 8″Beam: 7′ 9″ Draft: 2′ ½″/3′ 9″Sail Area: 263 sq ftWeight: 2,500# (approx)Proportionately, this is the largest sharpie type known, and shows the maximum beam ratio successfully used in the sharpie type.
These handsome, practical row boats were routinely built by Nova Scotia shipwright, Jim Smith in six days, painted and ready for the water.
Rifleman was intended as an economical planing hulled speedboat suited for coastal inshore fishing.
She is built of plywood and is intended for 15/20 hp outboard motors.
Everyone from Louisiana seems to remember that cypress pirogue boat Pawpaw kept in his barn. Cypress pirogues have since become a relic of the past. Pirogues are flat bottom boats designed to paddle shallow swamps and marshes.
This 24' Australian design provides three arrangements to choose from-a small cuddy, or two cabin styles.
Construction is plywood with a single hard-chine.
Construction: Plywood planking over sawn frames.
Alternative construction: Strip.
Lofting is required.
The Shearwater Hybrid combines the best qualities of stitch-and-glue plywood kayaks with the beauty of a cedar strip deck.
The CS25 is an offshore boat based on the Carolina Sport Fishing boats lines.
The idea behind this design was to see how much boat can be squeezed out of a single sheet of plywood 4x8′ (1220 x 2440mm). The resulting boat is suitable for kids to paddle on ponds or very small lakes.
Believe to be second hull built to the design after the Hiscock’s first circumnavigation, launche
1938 Hinkley Islander Sparkman & Stephen’s design.
Custom built cruising sailboat constructed with a 1 1/8″ thick spruce, edge nailed, strip-planked
A kit boat from Russell Brown’s Port Townsend Watercraft, designed by Bieker Boats.
