A Platt Monfort design called Nimrod 12.Built from off cuts of fir from the mast of the Mystic Seaport’s Amistad schooner, a chunk of green white oak, a few shop scraps and some spare time.
Cutter designed by John Hyslop in 1876. An early combination of English and American ideas, PETREL was designed according to the wave form theory.You’ll receive 2 pages of plans historical information about the boat and step-by-step instructions for half-hull building,using the lift method.The pl
Keel/centerboard cutter designed by Edward Burgess in 1888 and first of his “Compromise 40-footers”.The plans produce a model that is 25″ long.You’ll receive 4 pages of plans historical information about the boat and step-by-step instructions for half-hull building,using the lift method.There are
Cutter designed by William Fife Jr., in 1888.The plans produce a model that is 28″ in length.You’ll receive 3 pages of plans historical information about the boat, step-by-step instructions and full-sized patterns for each lift, as well as template for you to shape the profile.
Cutter designed by Edward Burgess in 1887, and the inspiration for the 40′ class.The plans produce a model that is 22″ long.You’ll receive 3 pages of plans, historical information about the boat, step-by-step instructions and full-sized patterns for each lift, as well as template for you to shape
Late 19th-century skimming-dish sloop designed by Isaac P.
High performance beach cat which is striking to look at and exciting to sail. Well-detailed plans of simple and rugged stitch-and-glue plywood hulls.
Construction: Stitch-and-glue plywood over bulkhead frames.
No lofting is required.
Plans include 2 sheets.
This 32′ double-ended sharpie ketch will provide the amateur builder with a shoal-draft cruising boat of simple construction.
Construction: Plywood planking over sawn frames.
Lofting is required.
Plans include 4 sheets.