The plan has been designed according to the regulations of the class “10 feet”. So was born a simple, light and very fast plan.Start 30 has a double life.
Sorry for my English but I write the translator google.
I built a canoe with wood strip technology.
Long Tail 6.5hp motor rigidly with the possibility of raising and lowering the shaft + teleflex.
20 foot simmons type high side with traditional 14 degree transom. Built for salmon fishing on the Oregon coast. Powered by a 60 horse etec and 6 horse kicker. I can be reached at 541 459 5752
Built as a tender for our Daysailer. The Pram will help us get out to the mooring and back. This is not my first build, but is a great first boat for anyone who wants to give building a try.
12′ Chesapeake Light Craft Wood Duck kayak. Launched at The Whalehead Club at Corolla, NC in June. Constructed by Jeff Loomis between January and June, 2013.
This dory style sailboat was built in a small wood shop in my yard. It took ten months to build and would never have happened had it not been for the folks at Chesapeake Light Craft and their assistance.
Designed by Mike Roberts of Headland Bay Boats in Brisbane, Australia. This is the Eve (short for “Evolution”) 16, a strip plank bottom and glued lapstrake sides, based on the same designers Green Island 15 Stitch and Glue version.Sail area is a gunter rig of about 106 sq. ft.
Customized Wee Lassie IIThe canoe was built in 2009. The overall dimensions are of the Wee Lassie scale with the modification made adding 1″ in height to the gunnel. Length 13′4″.The hull is made from Western Red Cedar in continuous strips (not scarf jointed from smaller pieces).
Customized Solo PortageThe canoe was completed in 2013. The overall dimensions are of the Solo Portage scale with the modifications made by adding both an inner and outer stem in the bow and stern.The boat is designed as a single blade paddle canoe. The length is 14′6″.