Plans & Kits

IRC cruiser-racer

This 17' x 20" [5.2m x49cm] strip planked kayak is designed for comfort and speed in rough water. With a lot of capacity for gear, it can be used as an efficient expedition vessel while being fast, quick and fun as a day tripper. It will excel at downwind runs.

Round-bottomed pocket cruiser with room for an inboard auxiliary and accommodations for two.

Construction: Carvel planked over steamed frames.

Alternative construction: Cold-molded or strip

Lofting is required.

Plans include 11 sheets.

Kahuna is a superb coastal and long-distance cruising boat, designed for modern wood/epoxy construction. The first boat was built in Australia, and several have been launched in the US. Others are under construction — in the US (New York) and in Europe (Italy, the UK and Russia).

Here is a fine little working type punt that feels at home in the marshlands, as well as the open bay waters.She is 14′-9″ long and was designed around a working load, with a draft of about 3″.

The Lobster Boat 26 (LB26) is a plan for amateur builders like no other!

This 16' x 21" [4.9m x 53cm] strip planked kayak is adapted to comfort and responsiveness in active water. The nearly plumb bow and stern provide a long waterline in a compact package, allowing a good turn of speed in manageable size.

Riva’s only outboard designed in the early 50’s with a 25hp Evinrude. Some 140 models were built between 1950 and 1957. We have been fortunate enough to have received a good set of plans that cover all details enabling us to replicate this little treasure.

GOZZO 650, whose design is based on a typical Italian traditional boat (gozzo) combines classical lines with ease of handling and comfort.

8 plank stitch and glue canoe.