Plans & Kits

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick.

The lines for this canoe were taken from an original ‘Huron’ built in cedar/canvas by the Peterborough Canoe Company. It was a second grade model in a series of Cruiser canoes that measured from 16′ x 33″ to 18′ x 37″.

The design of Sportfish 570 comes from a collaboration with a Senegalese society, with the aim of creating fishing vessels for inland waters of modern conception.

New Lion 800 is a continuation of a series of plywood yacht designed by the company Unik Yachts.

The main idea of a series of yachts Lion is to maximize the manufacturability of the design and the ability to self-built yacht from a kit of parts cut on the CNC machine.

Our pre-cut kits are cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease. The ladder frame—the “foundation” of the boat—is now included with the kit.

A 15' Inboard Plywood Powerboat

‘Volare’ comes in two versions. This is the console version, the utility version is available as a separate set of plans. They’re both 15′4″ long and 5′ wide.Her length is that of two sheets of 8′ plywood and she’s built in two halves (bow end and stern end).

MASH is a design I created for Woodenboat Magazine’s Sketchbook article, issue 275, July/August 2020. She is a 24ft power cruiser with a cuddy cabin designed in the lobsterboat style.

MINUETTO CRUISER is the moderate version of a Mini Transat. Even if designed according to the class rules it has no ambition to compete but is just a fast and safe day-cruiser.

This 20′ cutter will prove challenging to build, but will reward your efforts with incomparable charm and grace.Atkin specifies traditional plank-on-frame construction.Construction: Carvel-planked over steamed frames.Alternative construction: Cold-molded or strip.Lofting is require.Plans include