Plans & Kits

The Workstar 17 concept of plywood/epoxy boat building was the result of a co-operation between Working Boats UK Ltd and Humphreys Yacht Design, which enabled people with no experience in building boats to put together, from a comprehensive kit of profiled parts, epoxy and FRP tape, a Workstar 17

SILVER 333 is a very small classical runabout for one or two people which may easily be transported on top of a mid-size car roof.

The JAM 8 is a true personal watercraft. While only 7 foot 4 inches long, it can carry up to 200 pounds. The JAM 8 is perfect for exploring flat water rivers, ponds and marshes.

V-bottomed cruiser designed for plywood construction with accommodations for two and inside ballast.Construction: Plywood planking over sawn frames.Lofting is required.Plans include 11 sheets.Please note: gaff rig version’s mast measurements are taken by scaling from the plans.Notice the below de

8 plank stitch and glue canoe.

Build the Babson 14 from scratch! Plans include three variations on the hull: sheet ply (like our kits), glue-lap-ply, power, suitable for up to a 2 horsepower outboard.Plans contain 16 sheets of drawings, full-sized mold patterns so no lofting is required (no offsets are included with the plans)

Zipper is an 11 foot runabout based on designs of the 1950’s for Class ‘B’ stock utility racing boats by Hal Kelly and William Jackson.This design differs from those of the period in that it is to be constructed in the 'Instant Boat' method using glass fiber and polyester or epoxy resins to make

Digger 17 is a classic form of flats skiff, seen working along every shore. Designed for modest power, she can get into the shallowest water and carry a hefty load.

The Chesapeake 17 is one of our most popular kits. Its handling qualities and speed combined with a large cockpit and voluminous stowage make it one of the most capable touring boats around.