Plans & Kits

16ft Plywood stitch & glue touring canoe.

A small and very simple tender to fit inside a station wagon or on a roofrack, this little plywood dink will suit some one wanting a tender for their small yacht or motorboat.

The Olga 28 is a trailerable power cruiser constructed with plywood and epoxy. The design was inspired by the classic power boats of the Pacific Northwest, while her construction takes advantage of modern materials to produce a lightweight, easily maintained boat.

Come experience the nuances of this East Greenland design.

The Ammassalik 180 is a true representations of the East Greenland design.

A 10' Flat Bottom Powerboat/Rowboat

This 20′ cutter will prove challenging to build, but will reward your efforts with incomparable charm and grace.Atkin specifies traditional plank-on-frame construction.Construction: Carvel-planked over steamed frames.Alternative construction: Cold-molded or strip.Lofting is require.Plans include

Redwing- a gentle, shoal-draft, low-powered
(5 to 10-hp), sheet-plywood outboard cruiser - can live on her trailer.

Whenever you wish, she'll be ready to go exploring.

These completely new designs were developed at CLC in response to a growing constituency of skilled paddlers seeking waterborne sports cars for racing, exercise, or just plain fun.

Based on Tom Gillmer and Iver Franzen’s New Moon (an enlargement on Gillmer’s Blue Moon), this sailing vessel is intended to be a stout, seaworthy, offshore-capable passagemaker, with an emphasis on the balance between comfortable sea-keeping and good sailing abilities.

The input was “design a pure cruising boat”.The boat has wide internal volumes, limited draft, average/high displacement and sailing area which do not require a continuos sail change.The hull lines have been developed both to corner and round.We wanted to realize something new for deck design.