Plans & Kits

A 15' Inboard Plywood Powerboat

The LINNET is a seaworthy rowing boat that has been specifically designed for sea use. Accordingly it does not have outriggers or a sliding seat while a small daggerboard is fitted to help prevent being blown sideways by the wind. A good load carrier, LINNET can be rowed by 1-3 people.

21′ 2″ Inboard/outboard runabout, built of marine plywood.Several design options include center console, outboard as well as inboard/outboard.And, configurations also include different heights for the windshield.Construction: Plywood.Lofting is required.Plans include 5 sheets.

Dixi Dinghy plywood 3:1 dinghy

The Venture has a perky feel with a springier sheer line, compact length and the upright bow.

Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.The ladder frame—the “foundation” of the boat—is now included with the kit.

A 15' x 26" recreational/light touring kayak.

This is a design for the 2.4mR class. The measurement formula is the same as for the bigger sisters like the famous 12mR yachts once used for the Americas Cup. As the down-scaling would leave the boat with to little righting moment there has been some adjustments to take care of this.

Our pre-cut kits are cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease. The ladder frame—the “foundation” of the boat—is now included with the kit.

This is a centerboard cruising boat for couples and small families. Lightweight and strong, it can be easily hauled with a trailer. Construction: Plywood topsides over bulkheads and stringers; strip planked bottom Lofting is required. Plans include 6 sheets.