If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the FEATURED BOATS MUST BE BUILT OF WOOD.
To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
WAVERUNNER 342 (36 FT) Wood /Epoxy
“Goldfish” is the slightly smaller version of our “Happy Hour” fishing kayak. Splicing of plywood sheets is not required as is the case with “Happy Hour”. All parts of the boat fit within the length of a standard sheet of 1/4″ (6mm) exterior grade plywood 8′x4′ (2.4x1.2m).
An outboard skiff with a wide bottom and moderate rocker that contribute to stability and the ability to carry weight back aft.
This design was inspired by Ross Lillistone’s “Water Rat”. The bow transom was replaced by a pointed stem. Also the internal volume and from there the displacement of the boat were increased by about 20%. Changes were made to the seating arrangement as well.
We chose the 9.1 mt LOA not to overcomplicate its construction, but to facilitate the availability of a place to build this boat, and at the same time to have internal volume that allows a comfortable cruise.
Round-bottomed, carvel-planked powerboat with two berths and a single 300-hp engine.
Construction: Carvel planked over steamed frames.
Alternative construction: Strip or cold-molded
Lofting is required.
Plans include 5 sheets.
Kahuna is a superb coastal and long-distance cruising boat, designed for modern wood/epoxy construction. The first boat was built in Australia, and several have been launched in the US. Others are under construction — in the US (New York) and in Europe (Italy, the UK and Russia).
An open shoal-draft centerboarder suitable for rowing, daysailing, or coastal cruising.
Construction: Carvel planked over steamed frames
Alternative construction: Lapstrake, strip, or cold-molded
Lofting is required
Plans include 3 sheets.
For those beautiful days out for lunch on the river or an evening on the lake by yourself, this is the boat.
The Mini Skeeter was made primarily as a fun leisure iceboat that I could use on smaller lakes. The goal I was aiming for is a small, comfortable, warm iceboat that looks elegant. The fuselage is about slightly more than10′ long. The beam is 82″.
Believe to be second hull built to the design after the Hiscock’s first circumnavigation, launche
1938 Hinkley Islander Sparkman & Stephen’s design.
Custom built cruising sailboat constructed with a 1 1/8″ thick spruce, edge nailed, strip-planked
A kit boat from Russell Brown’s Port Townsend Watercraft, designed by Bieker Boats.
