Plans & Kits

7.5m Racing Tri built in ply

The Lobster Boat 26 (LB26) is a plan for amateur builders like no other!

The Mini Skeeter was made primarily as a fun leisure iceboat that I could use on smaller lakes. The goal I was aiming for is a small, comfortable, warm iceboat that looks elegant. The fuselage is about slightly more than10′ long. The beam is 82″.

Sandy is a husky centerboard cutter designed for extended coastal cruising in such areas as the east coasts of the U.S. or Australia, the Pacific Northwest, or Europe.

ROBERTS 470 - WOOD EPOXY
The accommodation of this design has been laid out to suit two couples. The Roberts 470 makes a fine long distance cruising yacht.

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick.

The “Footy” class, for boats which fit within a 12″ x 6″ box.We think you’ll find this design completely irresistable.Designed by Flavio Faloci a naval architect based in Genova, Italy, BRANDO includes 12 pages of plans, detailed building instructions, and complies with Footy class rules for radi

Developed in response to requests from heavier and wider paddlers who also wanted a shorter boat, this stable load carrier is excellent for the novice kayaker.

The Headwater TRANSPORT 9.9 is an easily Car-Topped Pram Dinghy with a constant deadrise 10 deg. V-bottom Planing Hull  with lifting chine strips.  Bow and stern seats provide level flotation if the hull is swamped, and also provide dry storage if watertight closures are installed. 

High performance beach cat which is striking to look at and exciting to sail. Well-detailed plans of simple and rugged stitch-and-glue plywood hulls.

Construction: Stitch-and-glue plywood over bulkhead frames.

No lofting is required.

Plans include 2 sheets.