Plans & Kits

Short handed offshore racer

Bedard Yacht Design’s Ozona X Nesting Pram evolved from the hugely popular Ozona Pram and a significant demand from cruisers for a nesting dinghy, slightly larger.

At 14 feet this is Riva’s only outboard powered design. Originally designed in the 1950s, only some 150 were ever produced.

October 8th, 1977, twenty-four “21 feet sailing boats” single handed left Penzance (United Kingdom) for Antigua with a stopover in Tenerife.The smallest offshore racing boats were born and so was favourite race: the Mini Transat.

LOA: 33′ 1″LBP: 32′10″LWL: 26′ 8″BEAM: 10′ 0″DRAFT: 2′ 3½″/5′ 3½″DISPLACEMENT: 9,000lbs (approx)BALLAST: 2,000lbs lead under the settees.1,000lbs additional lead for trim.SAIL AREA: 388 sq.

This exquisite launch leaves little wake at five knots. Her plans show both cold-molded and plank-on-frame construction. Construction: Cold-Molded or Carvel planked over steamed frames. Alternative construction: Lapstrake. Lofting is required. Plans include 5 sheets.

The Sharpie Cat 42 is a new catamaran design from a regular WoodenBoat contributor, author and marine architect Reuel B. Parker. She is a fast cruising cat with accommodations for eight in four cabins.

An open shoal-draft centerboarder suitable for rowing, daysailing, or coastal cruising.

Construction: Carvel planked over steamed frames

Alternative construction: Lapstrake, strip, or cold-molded

Lofting is required

Plans include 3 sheets.

Construction: Strip planked and glass/epoxy sheathed.

Alternative construction: Cold molded, traditional wood and canvas lapstrake plywood.

No Lofting required.

Plans include 4 sheets.

Zipper is an 11 foot runabout based on designs of the 1950’s for Class ‘B’ stock utility racing boats by Hal Kelly and William Jackson.This design differs from those of the period in that it is to be constructed in the 'Instant Boat' method using glass fiber and polyester or epoxy resins to make