Plans & Kits

Offshore cruising catamaran

Hyak is a single kayak designed for multi-day excursions and recreational racing.

This is a design for the 2.4mR class. The measurement formula is the same as for the bigger sisters like the famous 12mR yachts once used for the Americas Cup. As the down-scaling would leave the boat with to little righting moment there has been some adjustments to take care of this.

Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.The ladder frame—the “foundation” of the boat—is now included with the kit.

Based on the Donzi Sweet 16, this little treasure boasts a generous deep V at the transom allowing for smoother running and bad weather handling.

A stable (28 1/2″ beam) strip-built touring kayak.

Planked up with 1/4″ cedar strips.

Construction: Strip planked.

Lofting is required.

Plans include 4 sheets.

A 10 ft. traditional lapstrake-planked Norwegian style pram. Strikingly elegant but very practical rowing tender.

Argie 15 plywood sailing dinghy

Carvel-planked, outside ballasted cruiser with choice of three or four berths.

Construction: Carvel planked over steamed frames

Alternative construction: Cold-molded or strip

Sail Area : Sloop - 528 sq. ft., Yawl - 579 sq. ft.

Lofting is required.

Based on traditional crabbing skiff documentation by Howard Chapelle, this has proven to be a fast and stable boat that can carry a real load.