If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
A big, healthy, open skiff with sophisticated lines. Construction: Strip planking over sawn frames; double diagonal bottom. Alternative construction: Plywood lapstrake topsides. Lofting is required. Plans include 6 sheets
Digger 17 is a classic form of flats skiff, seen working along every shore. Designed for modest power, she can get into the shallowest water and carry a hefty load.
The Mill Creek 13 looks good, they're easy to build, and even though they are more stable than most kayaks, the Mill Creek 13 offer good speed and handling that you'll never get tired of.
This charming addition to our cradle boat fleet is adapted from a type known as a pram. Prams have transoms at both bow and stern, and are used extensively as tenders for larger vessels because of their roominess in a relatively short length.
This boat is a larger version of my popular POINT COMFORT 18, a traditional Chesapeake Bay workboat type reinterpreted for simpler and more modern construction.
In line with the current standard projects, the Start 100 was born by the need to offer spacious interiors to cruisers not necessarily for long cruises in sheltered waters.The hull construction is made of longitudinal structure in mahogany khaya and okoumè for deck and interiors.The hull geometry
Construction: Glued lapstrake clinker plywood. Alternative construction: Traditional plank, cold molded and strip plank.
Sail Area: Lug 62 sq. ft.
Gunter sloop 72 sq. ft.
No Lofting required.
Plans include 6 sheets.
The Workstar 17, as Explorer, Fisherman and Rescue models.Designed using the Prefix System™ by Rob Humphries and Working Boats UK Ltd (the predecessor of Pacific Workboats cc), the Workstar 17 is built from a kit of profiled 1/2″ (12mm) and 3/4″ (18mm) marine plywood.
Thurlow provides you with three different construction alternatives: wood-strip planking, with frames; woodstrip frameless planking covered with fiberglass; and wood-canvas construction.
Construction: Wood-canvas, wood-strip-plank or wood-strip fiberglass
This 14′ pulling boat was inspired by the Typical Whitehall Designs uses as work boats of the harbors of New York a century ago. Altered to be more of a recreational boat, you will find that pulling the oars on this boat is a delight.
R class sloop 1924. Burgess Swasey Paine design. Fully restored, in racing trim.
Terrific trailerable cruiser, set up properly for a couple to explore remote cruising grounds for
Main and jib only broad reach > 11.5 knots. Located Santa Barbara Harbor. 2010 build.
