Plans & Kits

Didi 38 radius chine plywood cruiser/racer

This beautiful 11′ 2″ dinghy is similar in construction to the Nutshell Pram, although it is slightly larger, with a pointed bow.Construction: Glued-lapstrake plywood.Alternative construction: Traditional lapstrake.No lofting is required.Plans include 5 sheets.

MAGIC TIMES is a wooden boat for fishing and hiking which combines comfort of stability and aisance of displacement vieu its light weight it can be easily transported everywhere.

A charming, shoal-draft, carvel-planked cruiser for two.Wenda possesses a timeless elegance.She’ll work her magic in the 21st century as she did in the 19th.Construction: Carvel planking over steamed frames.Alternative construction: Cold-molded or lapstrake plywood.Lofting is required.Plans inclu

This 24' Australian design provides three arrangements to choose from-a small cuddy, or two cabin styles.

Construction is plywood with a single hard-chine.

Construction: Plywood planking over sawn frames.

Alternative construction: Strip.

Lofting is required.

The Headwater TRANSPORT 9.9 is an easily Car-Topped Pram Dinghy with a constant deadrise 10 deg. V-bottom Planing Hull  with lifting chine strips.  Bow and stern seats provide level flotation if the hull is swamped, and also provide dry storage if watertight closures are installed. 

VOYAGER 600

CRUISING SAILBOAT WOOD EPOXY boat plans & FSP

‘Volare’ comes in two versions. This is the utility version, the console version is available as a separate set of plans. They’re both 15′4″ long and 5′ wide.Her length is that of two sheets of 8′ plywood and she’s built in two halves (bow end and stern end).

Athelas is a 17'-2" open water recreational rower for one or two based on a lines sketch by N. G. Herreshoff. Built from 6 and 9 mm glued lapstrake plywood, she weighs 81 pounds and can be cartopped

We designed KIS dinghies in order to meet a very practical need of amateur boatbuilders.