Plans & Kits

Argie 10 plywood 3:1 sailing dinghy

This schooner is intended as a comfortable cruising yacht for a couple with occasional guests, and to be of simple construction so that Jack everyman can build it.  It has a twin keel / centreline rudder configuration.  

An open shoal-draft centerboarder suitable for rowing, daysailing, or coastal cruising.

Construction: Carvel planked over steamed frames

Alternative construction: Lapstrake, strip, or cold-molded

Lofting is required

Plans include 3 sheets.

Construction - Glued lapstrake clinker plywood.
No Lofting required.
Plans include 5 sheets with instructions.
Sail Area - 60 sq. ft.

The Matunuck is a surf kayak designed by Nick Schade to be comparable with the best carbon-fiber surfyaks on the market.

Simple sheet plywood sports rowing boat, stitch and tape construction. As easy to build as it gets!

Sloop designed by N.G. Herreshoff in 1891. A revolutionary yacht, she featured a convex bow rather than the then-current long, hollow entrance.

A fast daysailer of stitch-and-glue plywood construction. Dismantles for cartopping. Deep V-hulls, no centerboard. Construction: Stitch-and-glue plywood over bulkhead frames. No lofting required. Plans include 3 sheets.

Virginia Park is an elegant lapstrake launch. Featured in WoodenBoat #234, Sept. – Oct. 2013, Virginia Park is built in the glued lapstrake method with steam bent frames.

Tolman Skiffs are thoroughly modern, ocean capable, vee bottom stitch and glue plywood boats with a dory ancestry. These skiffs are designed for Alaskan waters and are ideal for sport fishing, beach camping, cruising and general work or recreation.