Plans & Kits

Dixi Dinghy plywood 3:1 dinghy

An outboard skiff with a wide bottom and moderate rocker that contribute to stability and the ability to carry weight back aft.

• Construction: Cross-planked bottom, lapstrake sides
• Alternative construction: Plywood or glued-lapstrake plywood
• Lofting is required

7.5m Racing Tri built in ply

Capacious, seaworthy, flat-bottomed skiff weighing less than 150 lbs. Construction: Cross-planked bottom, lapstrake sides. No lofting is required. Plans include 5 sheets.

The sharply raked stem and well shaped forward sections will provide increasing buoyancy as the Endeavour punches into large waves.

An easy-to-build boat designed to ship as a kit in a flat pack box. Everything needed to complete the boat, except the motor, is included in the kit.

Beamy yet fine-lined rowing/sailing boat designed for lightweight construction.

Construction: Cold-molded.

Lofting is optional.

Plans include 5 sheets.

Construction — Glued lapstrake clinker plywood. Alternative construction —Traditional plank, cold molded and strip plank. No Lofting required. Plans include 7 sheets with instructions. Sail Area — Lug 65 sq. ft. Sloop 84 sq. ft. Yawl 81 sq. ft.

The Noank Pulling Boat is an 18′ x 36″ [5.5m x 91cm] sliding seat rowing boat suitable for open water travel.

The Rice Lake Skiff is sure to be a very useful boat at the cottage for fishing, rowing or just knocking about.