If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
Based on Tom Gillmer and Iver Franzen’s New Moon (an enlargement on Gillmer’s Blue Moon), this sailing vessel is intended to be a stout, seaworthy, offshore-capable passagemaker, with an emphasis on the balance between comfortable sea-keeping and good sailing abilities.
Badger gained widespread fame as the subject of the book Voyaging On A Small Income. The concept of this design was to use the basic interior accommodation plan that worked so well on the 34′ Topsail Ketch Sunrise, which was evolved and improved on during the decade that I lived aboard her.
Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.The ladder frame—the “foundation” of the boat—is now included with the kit.
Construction — Glued lapstrake clinker plywood. No Lofting required. Plans include 5 sheets with instructions. Sail Area — Lug 83 sq. ft. Sloop 95 sq. ft.
The TX18 is an inverted vee boat, Hickman sled type designed for fishing the flats along the Gulf of Mexico or anywhere a shallow draft boat must go long distance in choppy seas.
Capacious, seaworthy, flat-bottomed skiff weighing less than 150 lbs. Construction: Cross-planked bottom, lapstrake sides. No lofting is required. Plans include 5 sheets.
The Solo Quick blends efficiency, weight carrying capacity and beauty. Paddlers will find that her lean entry and minimalist profile make for a surprisingly quick and versatile hull.
The Workstar 17 concept of plywood/epoxy boat building was the result of a co-operation between Working Boats UK Ltd and Humphreys Yacht Design, which enabled people with no experience in building boats to put together, from a comprehensive kit of profiled parts, epoxy and FRP tape, a Workstar 17
Easy To Build | Cartoppable | Build With The FamilySpecifications:
An open boat that rows with ease and swiftness and is stiff enough under sail to stand up to a breeze.
Construction: Carvel planked over steamed frames
Alternative construction: Lapstrake or strip
No lofting is required
Plans include 6 sheets
This is the perfect little day-sailor for anyone looking for a unique and stunning single-hander.
Built in 1972 by Trumpy Yachts in Annapolis, MD overall length is 72’ / 21.95m, with a beam of 18
