Lightweight, reasonably seaworthy recreational single with a sliding seat and outriggers.
Construction: Cold molded
Lofting is required
Plans include 5 sheets.
An easy-towing, easy-rowing tender featuring simple plywood construction and good capacity.
Construction: Plywood
No lofting is required
Plans include 3 sheets.
Light, lapstrake-planked open canoe for sailing or double-paddling. Construction: Lapstrake planking over steamed frames. Lofting is required. Plans include 4 sheets.
Norwegian-influenced rowing/sailing craft designed for glued-lap plywood construction.
Constuction: Glued lapstrake plywood
No lofting is required.
Plans include 8 sheets.
Capacious, seaworthy, flat-bottomed skiff weighing less than 150 lbs. Construction: Cross-planked bottom, lapstrake sides. No lofting is required. Plans include 5 sheets.
Flat-bottomed rowing skiff elegant enough for a yacht tender.
Construction: Cross-planked bottom, lapstrake sides
No lofting is required
Plans include 1 sheet.
V-bottomed single shell with sliding seat, outriggers and light plywood construction.
Construction: Plywood planking over bulkhead-type frames.
No lofting is required.
Plans include 4 sheets.
Jolly Boat is a rocking toy boat designed to provide years of make-believe nautical adventure for the young sailor, It is an adaptation of the classic flatiron skiff, a type that generations of “old salts” remember fondly as their first “real” boat.Jolly Boat has a length of 48″ and a beam of 23″
This charming addition to our cradle boat fleet is adapted from a type known as a pram. Prams have transoms at both bow and stern, and are used extensively as tenders for larger vessels because of their roominess in a relatively short length.
The cradle boat Baby Tender is an adaptation of the classic yacht tender carried aboard many of the finest yachts during the time when wooden boatbuilding was truly an art. The boat has a length of 45 in. and a beam of 22 in.