Miles Macedo of North Providence, Rhode Island, launched his 3′ rocker dory on Christmas Day, 2012. His grandfather, Rod Fuqua, built the boat with cedar planking and oak stem and transom.

Hagoth is an epoxy-glued stitch and glue Annapolis Wherry Tandem by Chesapeake Light Craft. Jared launched the boat on 9/19/12 at Utah Lake. This picture was taken on 3/29/13. The boat was built during a week long class in April of 2012 and finished over the span of 5 months.

DEDE is an epoxy-glued lapstrake Penobscot 17 designed by Arch Davis, and built by Ed Titus, an alumnus of the WoodenBoat School. Ed built DEDE from meranti  plywood and Douglas-fir, and trimmed her with ipe.  She has a gunter rig with tanbark sails.   DEDE is 17′ long with a 5′ beam.

Mark McGinley built this Iain Oughtred–designed 7-1/2′ Auk ELSIE KAY from okoume plywood as well as locally cut quarter-sawn oak, ash, and pine. She is the tender for his Pacific Seacraft PS-25 located in the Apostle Islands area of Lake Superior.

Emmanuel Alassoeur built this 14′ Périssoire from plans by François Sergent that appeared in 1944 in his book called Construction of Canoes and Kayaks. Emmanuel spent about four months building the hull, planking her with red cedar and building the deck from plywood.

15 ft skiff designed by Phil Bolger and taken from Dynamite Payson's Instant Boats book. It was an enjoyable first boat project. I added an center rear seat and a bow seat. I launched her into San Diego Bay.

15′ skiff DIABLO by Phil Bolger and taken from a Dynamite Payson book. I enjoyed this project. It was my first boat build. I tested with the outboard shown but will probably remove it. I modified the rear seat with a center seat, and added a bow seat. I took it out in San Diego bay.