Backbone timbers are white oak from the Eppick farm in Newberg, OR. Keel is Douglas fir; planking, Port Orford cedar. Deck is 1″ marine plywood covered with a felted polyester fabric and epoxy. Frames are white oak, the separate bulwark stanchions are black locust.
I had a great time learning and building this 17′ Tillamook Pacific Power Dory. I chose this boat to do some fishing and take my kids out on the water here in Florida and the boat can handle it all.
John Laudano Jr. of Middletown, Connecticut, designed and built this 61″ model runabout, with some help from his dad, over the winter of 2014–2015. SAUNDRA MAE has sapele planking on plywood frames. John made the windscreen, steering wheel, and fittings from scrap aluminum.
When his first granddaughter was born, Todd Roberts wanted to build her an heirloom cradle. He thought a canoe cradle would be just the ticket as he could use birchbark from his land for the cradle’s hull. Todd developed his own design after researching canoes and cradle boats.
Jeff Parker recently launched this cypress and mahogany Petrel Kayak in Lake Bluff, Illinois. The 53 lb Petrel Kayak is designed by Nick Schade, who runs Guilllemot Kayaks, www.guillemot-kayaks.com.
John Gotjen of Chocorua, New Hampshire, took some time during the 2015 Christmas Holiday season to build this 6′ lapstrake skiff for his friend Frosty. CHOCORUA is built from 5/16″ underlayment plywood and luan plywood transom, and some leftover tubes of adhesive caulk.
At The Folk School of Fairbanks, Alaska, last August, a group of students and their instructors, Andy Reynolds and Bruce Campbell, built a 12′6″ Stand-up Paddleboard in a little over two weeks.
Wood. Hard chine double planking bottom.
Building specifications:
Keel Pine pressure treated 3-1/2″ x 3-1/2″
Keel sole flat bar hot rolled steel flat 1/8 ″ x 2-1/2 ″
Frames sides Spruce/Hemlock/Fir 1-1/2″ x 2-1/2″
Frames bottom Spruce/Hemlock/Fir 1-1/2″ x 3″