Oar / Paddle
Kymi River 16
4.80 m Plywood stitch & glue touring canoe. Only two plywood sheets are needed!
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here.
There is no charge for listing, but the FEATURED BOATS MUST BE BUILT OF WOOD.
To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
4.80 m Plywood stitch & glue touring canoe. Only two plywood sheets are needed!
The SILVER 333 is a very small classical runabout for one or two people which may easily be transported on top of a mid-size car roof. Maximum suggested power of the motor is 15/20 HP, which is sufficient for planing.
The Wood Duck 10 Hybrid combines the best qualities of stitch-and-glue plywood kayaks with the beauty of a cedar strip deck.
A small river ferry has been designed to transfer up to 60 passengers.
The design is a catamaran of marine plywood construction using fibreglass/epoxy to connect the seems.
The design is using the torqeedo electric motor concept using power dense lithium ion batteries.
It’s hard to imagine you could make a nicer gift for your favorite munchkin. Created by Buckley Smith (author of Moonsailors) this animated rocking dory is oozing with personality.
Compromise sloop designed by N.G.
The GYPSY 28 was the Woods Designs’ own cruising boat for five very successful years. It was designed as an easy-to-build budget ocean cruiser and many are now sailing in all corners of the world.
The Duo is a simple to build 3m (10ft) hard chine rowing and sailing dinghy that can be built from just two sheets of 4mm (3/16in) plywood. It is also available as a nesting dinghy, so it can be stored on a cabin roof or even in the back of a car.
The CS-18 is an open interior design with the home builder in mind. It is designed for an above deck fuel tank and less aggressive flare in the bow. These features make this design an easier and faster build and at 18.5′, it will fit in most home garages.
Glued-lap plywood rowing or sailing tender with plenty of capacity. Construction: Glued lapstrake plywood. No lofting required. Plans include 5 sheets.
"SHADOWFOX" 31' Ocean crossing cruiser ready to set sail!
Designed for us by Phil Bolger, Willow is a shallow draft (2’), leeboard cat-yawl launched in 199