Plans & Kits

The Cradle Pram Papoose, for the newborn sailor

Construction - Glued lapstrake clinker plywood. No Lofting required. Plans include 7 sheets with photocopies of Classic Boat building series. Sail Area - 67 sq. ft.

Sharpie 31.5′ EGRETL.O.A.: 31′ 6 ½″SPARRED LENGTH: 35′ 6″L.W.L.: 26′ 3″BEAM: 8′ 6″DRAFT: 1′ 2 ¼″ /4′ 8″SAIL AREA : (Depends on rig)DISP.: 5,000# (approximate, for cruising)BALLAST: 1,500 lbs. lead, inside; additional to trim as needed.

“Goldfish” is the slightly smaller version of our “Happy Hour” fishing kayak. Splicing of plywood sheets is not required as is the case with “Happy Hour”. All parts of the boat fit within the length of a standard sheet of 1/4″ (6mm) exterior grade plywood 8′x4′ (2.4x1.2m).

If we have to base ourselves on market demand before 2008, the two daysailers that we propose are very small. At that time, generally characterized by a continuous increase in boat size, it seemed as though a daysailer could not be less than 12 m, (even better if it exceeded 15 m).

The Wood Duck 10 Hybrid combines the best qualities of stitch-and-glue plywood kayaks with the beauty of a cedar strip deck.

Steve Killing’s design is fast becoming well-known, in part due to the Endeavour being build in many a WoodenBoat School class, as well as being the featured boat in the Ted Moores book Kayakcraft.This is the boat for you, even if you have never paddled before.

BUILD FROM PLANS AND FULL SIZE PATTERNS IN WOOD / EPOXY

Build the Babson 14 from scratch! Plans include three variations on the hull: sheet ply (like our kits), glue-lap-ply, power, suitable for up to a 2 horsepower outboard.Plans contain 16 sheets of drawings, full-sized mold patterns so no lofting is required (no offsets are included with the plans)

Kingfisher’s shape was inspired by famous Chestnut Prospector. Hull width of 93cm, flat bottom and slim shape gives good stability and maneuverability. It is designed for crew of 2 with additional equipment (tents, fishing rods…).