Plans & Kits

Short handed cruiser-racer

Designed for a boat owner who wanted a rigid tender for his 24’ meter yacht, PRAM 220 has the minimum dimensions to be used at this scope. It may be used by children for sailing in protected waters.

This double-ended sloop combines genuine tradition and modern performance.

Construction: Glued-lapstrake plywood over laminated frames.

Lofting is required.

Plans include 4 sheets.

The BRIO 555 is a fast and easy to handle boat, suitable to be sailed sportively by a crew of two or quietly and safely by a larger crew.

Our pre-cut kits have been cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease.The ladder frame—the “foundation” of the boat—is included with the kit.

Bow and stern of English traditional narrowboat. Cutting files to produce a kit of steel parts for assembly. The midsection is a parralel box that can vary between 20 and 40ft. The midsection is produced by folding steel plate then adding the bow and stern.

V-bottomed cruiser designed for plywood construction with accommodations for two and inside ballast.Construction: Plywood planking over sawn frames.Lofting is required.Plans include 11 sheets.Please note: gaff rig version’s mast measurements are taken by scaling from the plans.Notice the below de

A strong, capable folding trimaran with exceptional overall performance. Professionally designed to be dry and comfortable, yet fast and fun. Plans now in 33 countries and plywood kits available in the USA, Australia and Europe.

“Breeze” is a 10′ (3m) double paddle canoe. Two sheets of plywood needed. Stitch and glue construction using 3″(75mm) fiberglass tape in epoxy for all seams inside and out. The deciding factors when designing the boat were mostly the same as with all my designs - seaworthiness and lightweight.

A small Carolina-Style center console fishing boat.