If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here.
There is no charge for listing, but the FEATURED BOATS MUST BE BUILT OF WOOD.
To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
The Sail kit allows you to transform the canoes NINFA, NAIADE and ONDINA, in small sailing trimarans for coastal cruising with minimal efforts.
Construction — Glued lapstrake clinker plywood. No Lofting required. Plans include 5 sheets with instructions. Sail Area — Lug 83 sq. ft. Sloop 95 sq. ft.
The idea behind this design was to see how much boat can be squeezed out of a single sheet of plywood 4x8′ (1220 x 2440mm). The resulting boat is suitable for kids to paddle on ponds or very small lakes.
Parker Marine Enterprises—Sea Bright 38Length Over All: 37′ 11”Beam: 10′ 6″Draft: 2′ 4″Displacement: 9,500 lbs, half-laden (approximate)Power: Yanmar 4JH4HTE (110 hp int/99 hp cont)Water: 200 gallonsFuel: 200 gallonsAccommodations: Sleeps four in double V-berth and two settee berths.
The Shearwater is an eye-catching, light and fast cruiser that does many things well. It is a strong contender for the budget-minded paddler looking to answer the 'if I could only have one kayak' need
Simple sheet plywood sports rowing boat, stitch and tape construction. As easy to build as it gets!
The Shearwater Hybrid combines the best qualities of stitch-and-glue plywood kayaks with the beauty of a cedar strip deck.
The North Sea 29 is a centerboard boat designed for sailing in the rough North Sea. She’s a fairly heavy displacement boat that will prove a very capable ocean cruiser.
Spring Lake Small Craft can provide a very complete CNC routed kit for the Pippie 8 tender. Designed by Mike Waller (http://www.wallerdesign.com.au) to be used as a very versatile tender.
Our pre-cut kits are cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease. The ladder frame—the “foundation” of the boat—is now included with the kit.
Built in 2019, this little boat is a real looker. Sleeps two with a small galley.
2015 Maine Landing School 17' runabout, unique, only four built, hand crafted wood/fiberglass mat
1958 Fenwick Williams 18' wooden catboat with tender and new 2023 galvanized trailer with stainle
