Plans & Kits

Didi 34 radius chine plywood cruiser/racer

The Headwater TRANSPORT 9.9 is an easily Car-Topped Pram Dinghy with a constant deadrise 10 deg. V-bottom Planing Hull  with lifting chine strips.  Bow and stern seats provide level flotation if the hull is swamped, and also provide dry storage if watertight closures are installed. 

Round-bottomed, outside-ballasted cruiser with accommodations for two.Construction: Carvel planked over steamed frames.Alternative construction: Strip.Lofting is required.Plans include 4 sheets.Please note: plans call for an engine long ago discontinued.You'll want to find a suitable alternative.

An outboard skiff with a wide bottom and moderate rocker that contribute to stability and the ability to carry weight back aft.

• Construction: Cross-planked bottom, lapstrake sides
• Alternative construction: Plywood or glued-lapstrake plywood
• Lofting is required

Single bed for the kids in the shape of a boat. Very easy to build and looks fantastic.

Light and fast, a 20' tortured plywood, decked dayboat: both a double kayak and a single scull in one hull. Her 'midship' section is similar to Aleut kayaks.

A 15' Inboard Plywood Powerboat

A refinement of the traditional Swampscott working dory for recreational use.

Plans include nine different rigs.

Construction: Glued lapstrake plywood over sawn frames.

Alternative construction: Traditional dory construction.

No lofting required.

Beamier, but no less elegant than the Wee Rob, this more stable double-paddle canoe can carry sail better.Any of the three lengths (13′ 6″, 15′ 8″, or 17′ 3″) can be built using the same plans.You’ll notice the different stem patterns on plans page 5...

Digger 17 is a classic form of flats skiff, seen working along every shore. Designed for modest power, she can get into the shallowest water and carry a hefty load.