If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
Bedard Yacht Design’s Ozona X Nesting Pram evolved from the hugely popular Ozona Pram and a significant demand from cruisers for a nesting dinghy, slightly larger.
The CS-18 is an open interior design with the home builder in mind. It is designed for an above deck fuel tank and less aggressive flare in the bow. These features make this design an easier and faster build and at 18.5′, it will fit in most home garages.
“Breeze” is a 10′ (3m) double paddle canoe. Two sheets of plywood needed. Stitch and glue construction using 3″(75mm) fiberglass tape in epoxy for all seams inside and out. The deciding factors when designing the boat were mostly the same as with all my designs - seaworthiness and lightweight.
Shallow-drafted V-bottomed cruiser with cross-planked bottom & berths for three. Construction: Carvel planked sides over sawn frames; cross planked bottom. Alternative: Strip-planked topsides. Lofting is required. Plans include 7 sheets.
Safe, dry, fast, and seaworthy V-bottomed inboard powerboat designed for carvel planking.
Construction: Carvel planked over sawn frames.
Alternative construction: Strip
Lofting is required.
Propulsion: 6 cylinder 350 cubic inboard.
Plans include 6 sheets.
Very simple workboat for outboard motor power. Suits 8 to 30 hp motors,carry up to six persons, can be built longer or shorter as required.
The Wood Duck 10 Hybrid combines the best qualities of stitch-and-glue plywood kayaks with the beauty of a cedar strip deck.
21′ 2″ Inboard/outboard runabout, built of marine plywood.Several design options include center console, outboard as well as inboard/outboard.And, configurations also include different heights for the windshield.Construction: Plywood.Lofting is required.Plans include 5 sheets.
1964 Celebrity Sloop #575. Built in Holland. 19’8”, 6’4” beam, 800 lbs. Centerboard, draws 3’.
Boat is 90% complete. Beautifully built cold-molded. Needs rudder, centerboard, mast, hardware.
Boat built in 1958, molded wooden ribs, plywood, fiberglass, cloth, front deck, split front seat.
