Plans & Kits

Here is another little skiff inspired by a Chesapeake Bay working craft.

Fast and slim, Seguin’s 21 1/2″ beam will challenge and reward experienced paddlers.Built of 4mm plywood, this hard-chined, stitch-and-glue sea kayak includes a retractable skeg that will provide balance and control.Construction: Stitch-and-glue plywood.No lofting is required.Plans include 5 shee

This Catamaran was designed for the avid home builder. Solid construction ensures a sturdy seagoing vessel for family cruising and exploring. The Magnificat was designed to maximise the space below and provide comfortable accomodations.

This exquisite launch leaves little wake at five knots. Her plans show both cold-molded and plank-on-frame construction. Construction: Cold-Molded or Carvel planked over steamed frames. Alternative construction: Lapstrake. Lofting is required. Plans include 5 sheets.

The Wood Duck 12 is a beautiful, easy to use recreational kayak - Here we have beautiful little kayak designed for just about everyone to enjoy on the water.

Cutter designed by John Hyslop in 1876. An early combination of English and American ideas, PETREL was designed according to the wave form theory.You’ll receive 2 pages of plans historical information about the boat and step-by-step instructions for half-hull building,using the lift method.The pl

LYS stands for Lumber Yard Skiff. These rugged flat bottom work skiffs were originally designed to be built using materials readily found in most lumber yards- underlayment plywood and spruce framing.

This is a design for the 2.4mR class. The measurement formula is the same as for the bigger sisters like the famous 12mR yachts once used for the Americas Cup. As the down-scaling would leave the boat with to little righting moment there has been some adjustments to take care of this.

New Lion 800 is a continuation of a series of plywood yacht designed by the company Unik Yachts.

The main idea of a series of yachts Lion is to maximize the manufacturability of the design and the ability to self-built yacht from a kit of parts cut on the CNC machine.

Here is a fine little working type punt that feels at home in the marshlands, as well as the open bay waters.She is 14′-9″ long and was designed around a working load, with a draft of about 3″.