Plans & Kits

An inshore skiff for sails, oars, or electric propulsion.

Please note: this design was formerly known as Pike.

Construction - Glue-lap-plywood flat bottom.

Alternative construction - Traditional plank.

No Lofting required.

Plans include 3 sheets with instructions.

Sail Area - Sprit 60 sq. ft.

Pdf and dxf files (for cnc machine) of solo fisher 45 kayak — set of parts plans and assembly instructions downloadable files.This SET OF PLANS will get you going to bild your own SOLO FISHER 45 Kayak.

PALOMA is an open sailing boat for family excursions. It’s a simple traditional and versatile boat which has been designed in three version as a small cruiser, as an open daysailer and as a motorboa

The CS-18 is an open interior design with the home builder in mind. It is designed for an above deck fuel tank and less aggressive flare in the bow. These features make this design an easier and faster build and at 18.5′, it will fit in most home garages.

Naviculus has teamed up with well known Australian Camper supplier Trayon to provide the camping experience on a boat. The boat is a simple open deck catamaran of wooden construction and with Torqeedo electric propulsion.

This is a 64 page construction guide for building a class legal PDRacer from PolySail International. The guide includes plans and is illustrated with multiple photographs taken as the prototype was being built over a period of six days.

- Trawler Yachts & Work Boats

Athelas is a 17'-2" open water recreational rower for one or two based on a lines sketch by N. G. Herreshoff. Built from 6 and 9 mm glued lapstrake plywood, she weighs 81 pounds and can be cartopped

Here is a fine little working type punt that feels at home in the marshlands, as well as the open bay waters.She is 14′-9″ long and was designed around a working load, with a draft of about 3″.