Plans & Kits

Wood strip/epoxy plans and kits

Waverunner 24 

Elegant, lightweight, sailing/rowing skiff. Construction: glued lapstrake plywood. Alternative construction: carvel, strip. No lofting is required. Plans include 6 sheets and instruction booklet.

Flat-bottomed rowing skiff elegant enough for a yacht tender.

Construction: Cross-planked bottom, lapstrake sides

No lofting is required

Plans include 1 sheet.

High capacity yacht tender with sailing ability. Exceptional stability, suited to beginner boatbuilders

PUCK 550 REGATA has been designed with the intention of creating a MICRO CLASS easily and quickly realizable with the stitch and glue method, but able to compete seriously in the class.

Light displacement boat, that resume classic water lines into a modern conception.

“Breeze” is a 10′ (3m) double paddle canoe. Two sheets of plywood needed. Stitch and glue construction using 3″(75mm) fiberglass tape in epoxy for all seams inside and out. The deciding factors when designing the boat were mostly the same as with all my designs - seaworthiness and lightweight.

This schooner is designed to be able to cruise offshore with a crew of four people.
Here heavy displacement and built down hull will make for a comfortable motion

The lines for this canoe were taken from an original ‘Huron’ built in cedar/canvas by the Peterborough Canoe Company. It was a second grade model in a series of Cruiser canoes that measured from 16′ x 33″ to 18′ x 37″.