Plans & Kits

Dixi Dinghy plywood 3:1 dinghy

Janus is a 4 berth trailable sailing catamaran built in sheet plywood. However, don’t be deceived by Janus’ simple dory shaped hulls (which make it a very easy boat to build). It has a lot of internal room for its length and a surprisingly good performance.

The Lorna has a slim sweet hull for experienced paddlers.

The boat is nice to row - a good combination of tippy enough for an intermediate, yet after a few days a novice will get the hang of it.

Designed with extended wilderness paddlers in mind, her easy handling, good stability and low weight (only 60 lbs) make the Taiga an excellent choice for weekend and day excursions as well.

BUILD FROM PLANS AND FULL SIZE PATTERNS IN WOOD / EPOXY

Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.The ladder frame—the “foundation” of the boat—is now included with the kit.

Skana is a single cockpit, wood strip kayak designed for multi-day use. The design is 17'4 in LOA with a max beam of 24". It has moderate rocker with average volume.

The CS-18 is an open interior design with the home builder in mind. It is designed for an above deck fuel tank and less aggressive flare in the bow. These features make this design an easier and faster build and at 18.5′, it will fit in most home garages.

The input was “design a pure cruising boat”.The boat has wide internal volumes, limited draft, average/high displacement and sailing area which do not require a continuos sail change.The hull lines have been developed both to corner and round.We wanted to realize something new for deck design.