Plans & Kits

Here is another little skiff inspired by a Chesapeake Bay working craft.

Cape Henry 21 lapstrake plywood trailer sailer

A modified V-bottom, with constant deadrise in its after sections. Construction: Plywood and Mahogany over sawn frames. Alternative construction: Cold-molded, double laminated plywood. No lofting is required. Plans include 8 sheets.

TRILLO is a fast but non-extreme trimaran that we designed with the aim of making it as simple as possible for amateur boatbuilders.

ALBATROS 26’ is the smallest sister of the ALBATROS family, our modern classic yachts. Far its size it cannot be defined a “blue water yacht” but it is a seaworthy boat.

A most elegant lapstrake, plywood peapod for oar and sail.

Full-sized mold patterns are included.

Construction: Glued-lapstrake plywood.

Alternative construction: Traditional lapstrake.

No lofting is required.

The Boat BW is a trailerable plywood stitch-and-glue skiff. The outboard-powered modified-vee hull with lifting strakes provides an efficient hull that rises on to plane with little-to-no porpoising. The below-deck bulkheaded and sealed compartments provide superb secondary flotation.

The Sea Island Sport is CLC’s response to hundreds of requests for an attractive stitch-and-glue sit-on-top kayak. Credit for the design goes to Nick Schade.

The Crystal 16 was designed to be a simple, lightweight flats skiff. Her hull is a simple V-bottom with a bit of flare in her topsides. Her deck features a large casting platform forward with two smaller platforms back aft on both sides. Storage is available up forward below the casting deck.

Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.The ladder frame—the “foundation” of the boat—is now included with the kit.