Plans & Kits

4.80 m Plywood stitch & glue solo canoe.

An ultralight solo pack canoe weighing in at 26 lbs. Carry the boat in one hand, your paddle in the other.

Derived from traditional Norwegian small craft, this handsome double-ender performs as well as a daysailer and beach cruiser.

Clean, frameless, glued-lapstrake plywood hull means, easy construction, happy trailering, and low maintenance.

Construction: Glued lapstrake plywood.

This design has a built-down keel to provide a deeper bilge, a centerboard housed entirely within the ballast keel, and a straight sheer.

Construction: Strip-planked over bulkhead / frames

Lofting is required.

Plans include 8 sheets.

Based loosely on the Folkboat, this plywood lapstrake double-ender combines comforting rough-water ability, and good looks.

Construction: Lapstrake plywood over laminated frames.

Alternative construction: Traditional plank on frame, strip or cold-molded.

A modern iteration of Philippine double outrigger canoe. Adapting to present-day construction method, the wooden facetted hull still has the silhouette of the Austronesian “Bangka”.

Fast and slim, Seguin’s 21 1/2″ beam will challenge and reward experienced paddlers.Built of 4mm plywood, this hard-chined, stitch-and-glue sea kayak includes a retractable skeg that will provide balance and control.Construction: Stitch-and-glue plywood.No lofting is required.Plans include 5 shee

We chose the 9.1 mt LOA not to overcomplicate its construction, but to facilitate the availability of a place to build this boat, and at the same time to have internal volume that allows a comfortable cruise.

Short handed offshore racer

Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.The ladder frame—the “foundation” of the boat—is now included with the kit.