If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
The Chaa Creek Expedition serves well for long distance tripping with heavy loads.
Flat-bottomed sailing skiff. Plans options include cross-planked or plywood bottom.
Construction: Cross-planked bottom, lapstrake sides
Alternative constuction: Plywood, glued lapstrake plywood
Lofting is required
Plans include 4 sheets.
Good speed and sea keeping ability with low impact & noise. 50hp outboard or inboard diesel.
Scherzando is a 12'10'' open canoe. The construction technique is a wooden basquet whith a canvas skin coated with epoxy or polyester. The plans include 7 station moulds, bow and stem at full escale.
Athelas is a 17'-2" open water recreational rower for one or two based on a lines sketch by N. G. Herreshoff. Built from 6 and 9 mm glued lapstrake plywood, she weighs 81 pounds and can be cartopped
Rugged, simple, stable, and economical to build, the Lumber Yard skiffs are based on traditional New England flat bottom work skiffs.
Construction: Glued lapstrake clinker plywood. Alternative construction: Traditional plank, cold molded and strip plank.
Sail Area: Lug 62 sq. ft.
Gunter sloop 72 sq. ft.
No Lofting required.
Plans include 6 sheets.
A simple and seaworthy V-bottomed centerboard cruiser with accommodations for two.
Construction: Plywood planking over sawn frames
Lofting is required
Plans include 10 sheets.
Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.The ladder frame—the “foundation” of the boat—is now included with the kit.
You think : I’d sure like to have a little harbor skiff to scoot around in the harbor/lake/river. And building a boat looks like fun, but I’ve never done it before; Not sure if I’m up to it.
The Town Class Sloop was originally designed in 1931 and built by Pert Lowell Company in Newbury,
The all wooden, completely finished sailboat, Elver Rose, was handcrafted by former owner, Rod Bu
