SHARPIE

Richard Goy of Brothers' Boatworks writes, "The boat is constructed of marine plywood and coated with fiberglass cloth and epoxy resin. It is powered by a 70 lb. thrust-modified Minn-Kota electric motor mounted under the rear deck. The mahogany seats and the ribbon stripe decks are coated with clear epoxy and numerous coats of spar varnish. This flat-bottomed boat was built primarily with epoxy adhesives.

From the Community

Classified

Boat Launchings

Boat Launchings

PT 11

I built this PT 11 nesting dinghy from the CLC kit over this past winter, to replace a 9'6" Nutsh