Richard Albert built this 14' pulling boat SECOND SNAKE designed by Henry Rushton (Model 109 Pulling Boat of 1884), launch ing it on August 9, 2004. He uses it on the Delaware and Raritan Canal in New Jersey, and the Delaware River.

PAMELA ANNE is a John L. Hacker 'Flapper' design that was developed back in the 1920's. The plans were originally published in Motorboating magazine about that time.

Jeff Ennis and his four sons built this birchbark canoe (16' x 36") in the summer of 2004 in Lac St. Marie, Canada. They used birch bark, green cedar, and spruce root in the construction. The green wood can be easily split into almost paper-thin sheets for making the floorboards.

Armand Charlebois launched this steamboat SARA C in August 2004 on the Ottawa River in Eastern Ontario, Canada. Weston Farmer is the designer of the 25' x 7' 'Diana' model boat. Armand strayed slightly from the plans by strip-building the hull, rather than using carvel planking as called for.

Jeff Spira has news from Iceland. He writes, "Geir Gislason and August Hinriksson recently launched this new 11' stitch-and-glue skiff. It has 1/4" plywood frames and 1/4" plywood covering. The design is a Spira International Mission Bay plan, available from Spira International, Inc., P.O.

Using Nick Schade's book,  "The Strip-Built Sea Kayak," Perry Risley built this 17' x 21' Guilllemot kayak and paddle. He made both boat and paddle of ash and Western red cedar with white accents of poplar. He mentions that Michael Earle was a tremendous help to him.

Dan Vallerga's first adventure in boatbuilding led to this Penobscot 17 (Arch Davis design) which took just 10 months from start to its launch on Sept 6, 2004. Dan uses the boat in Humboldt Bay, Eureka, CA. Contact Dan at vallergad@sbcglobal.net.

Tom Karsnia designed and built the EDNA BELLE during the summer of 2004. He writes that the boat floats and rides like a dream. It seems as light as a feather in the water. It is easy to maneuver and turns on a dime. It is made of 3/8" marine plywood and western red cedar coated with epoxy.

Matthew Sheffield built this Sand Dollar dinghy designed by Arch Davis in 2004. He keeps in the Ware River in Gloucester, VA, where he uses it for fishing and crabbing. He writes that it is as much fun to use as it was to build.

Launched in October of 2001, Tom Shives sails this San Francisco Bay Pelican in the waters of Puget Sound. With a length of 12', and beam of 6', WET DOG is designed by Captain William Short of Larkspur, CA. Tom is seen here at the tiller with his crewman, Skip Kratzer.