KNIPAN is the name of a black seabird with a dark green head, and of this 14′ boat built by Larserik Blixt, of Yxlan, Sweden. They launched her on May 7th amidst friends and family and warm spring sunshine.

When Bill Short designed the San Francisco Pelican in the 1970s, he made it 12′ long; later he stretched it to 17′ long, and called that version the Great Pelican. Brooke Elgie of Tenakee Springs, Alaska, extended Short's design still farther, to 19′6″, what he calls the Great Alaskan Pelican.

Martin Houston designed and built this mini-tugboat, JANI J, that he named for his wife, Janice Jeanette. The two of them built her over five years at their home in South Dakota, epoxying plywood onto fir frames, then covered with fiberglass cloth.

Jeff Rollins of J. M. Rollins Rowboats in Hudson Falls, NY recently designed and built this Lazy Sunday Rower, 10′4″ long and 4′ wide.

FIRST TRY is constructed with yellow pine framing covered in a fiberglassed and gelcoated southern pine exterior plywood hull. The stem is ash tying into an oak keel with oak bottom rubbers. The chines, gunwale rubbers, coamings, windshield frame, etc are made of Honduran mahogany.

After the parts were cut from marine plywood by their grandfather, Tavish and Niam Rogers assembled their first boat using copper ring nails and polyurethane construction adhesive.

I built this kayak all by my lonesome in a little shop in Pemaquid, Maine. She’s a beauty (takes after her owner is what I’ve been told), and handles something like a Corvette. I just finished a trip with her up the coast to Machias Port, and am back home dry and tired.

This is a modified version of a T.L. Simmons 18′ sea skiff.I used marine plywood sides instead of Lapstrake. I use the boat in the 10,000 Islands and in the Atlantic. Very seaworthy and tough.

This is my new launch Cirrus Greenland style kayak - 17′ 2″,  43lbs — stitch and glue mahogany and ribbed poplar with cherry and Spanish cedar accents, blackened epoxy seams, strengthened with carbon fiber in high stress inner deck and hull areas, and has rare earth magnetically sealed hatches fo

This design from CYD 4710 for Lorenzato’s family build from Cantiere Alto Adriatico. It’s very innovative in the layout and is the first of a series with this type for the same yard, with two separate cabins: one forward and one aft, with the dinette and living in the middle of the boat.