A working Friendship Sloop, or Maine sloop-boat, documented by Martin C. Erismann at the turn of the century.
Wide, shallow racing sloop designed by Cornelius Gorman in 1878.
Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.The ladder frame—the “foundation” of the boat—is now included with the kit.
Glued-lap plywood rowing or sailing tender with plenty of capacity.
Construction: Glued lapstrake plywood.
No lofting required.
Plans include 8 sheets.
A Platt Monfort design called Nimrod 12.Built from off cuts of fir from the mast of the Mystic Seaport’s Amistad schooner, a chunk of green white oak, a few shop scraps and some spare time.
Cutter designed by John Hyslop in 1876. An early combination of English and American ideas, PETREL was designed according to the wave form theory.You’ll receive 2 pages of plans historical information about the boat and step-by-step instructions for half-hull building,using the lift method.The pl
Keel/centerboard cutter designed by Edward Burgess in 1888 and first of his “Compromise 40-footers”.The plans produce a model that is 25″ long.You’ll receive 4 pages of plans historical information about the boat and step-by-step instructions for half-hull building,using the lift method.There are
Cutter designed by William Fife Jr., in 1888.The plans produce a model that is 28″ in length.You’ll receive 3 pages of plans historical information about the boat, step-by-step instructions and full-sized patterns for each lift, as well as template for you to shape the profile.
Cutter designed by Edward Burgess in 1887, and the inspiration for the 40′ class.The plans produce a model that is 22″ long.You’ll receive 3 pages of plans, historical information about the boat, step-by-step instructions and full-sized patterns for each lift, as well as template for you to shape
