A 100-year-old corncrib provided much of the wood for this 25' Chesapeake Skipjack. The keelson, frames, centerboard, and rudder are white oak. The cabin sides and trim are solid cherry. The builder, Lynn Miller, plans to use it for extended voyaging and cruising on the Great Lakes.

Bruce Johnson built this Steve Killing designed Endeavour 17 sea kayak in 2002. ANONA is strip-planked with western red cedar, maple, and "Louisville slugger" ash. ANONA is a native American word meaning 'laughing water'.

Tom Crucitti works for Arey's Pond Boat Yard where he restored this 22' Great South Bay Cat, ANN ELIZABETH. He replaced five planks, three frames, and the entire deck. ANN ELIZABETH was relaunched on August 10th 2002. Contact Arey's Pond at Box 222, South Orleans, MA 02662.

Dan Kelly of Weirton, WV, built this Joel White-designed Shellback dinghy in 2002. He modified the plans a little bit in using a titanium mast and titanium keel to keep her light. He also enclosed the area forward of the mast with cedar and filled it with foam insulation to add to her buoyancy.

David Satter restored this 1931 Old Town Canoe in 2002, after paying just $100 for her at a yard sale in NJ. It is an Old Town 50-lb 15 model. He replaced 10 ribs and 30 feet of planking, and replaced the canvas; then gave her a new coat of paint and varnish.

Sam Schaner built this 16'10' cedar-strip kayak, designed by Joe Greenley of Redfish Kayaks, using Western red cedar, basswood, walnut, and oak. It is the Spring Run model, 16'10" long with a beam just under 2 feet.

Roger Perrot built this Steve Killing-designed Endeavour 17 in 2002. After dreaming for several years, he finally began construction of the kayak in 2000 and finished for a August 2002 launching. He reports that is the first kayak of its design in Guernsey where he lives.

Scott Tobey writes that he "wanted a boat for exploring the lakes and streams of the Adirondacks so it had to be something silent and electric; something with a shallow draft and very maneuverable, ideally powered by two Minn Kota outboards with dual throttle control and power trim for launching

Richard Knight built this Sassafras 14 canoe from a kit designed by CLC using 4 mm okoume planks, which resulted in a finished weight of just over 42 pounds. He found the lapstitch construction to work well, the hull easily came together straight and true.

Seven-year-old Jamie Lowrey had the idea of building this boat from a single sheet of spare plywood. He and his father made scale models from shirt cardboard and built a full-size model from cardboard boxes in the living room of their Manhattan apartment.