Jeff Rollins of J. M. Rollins Rowboats in Hudson Falls, NY recently designed and built this Lazy Sunday Rower, 10′4″ long and 4′ wide.
FIRST TRY is constructed with yellow pine framing covered in a fiberglassed and gelcoated southern pine exterior plywood hull. The stem is ash tying into an oak keel with oak bottom rubbers. The chines, gunwale rubbers, coamings, windshield frame, etc are made of Honduran mahogany.
After the parts were cut from marine plywood by their grandfather, Tavish and Niam Rogers assembled their first boat using copper ring nails and polyurethane construction adhesive.
I built this kayak all by my lonesome in a little shop in Pemaquid, Maine. She’s a beauty (takes after her owner is what I’ve been told), and handles something like a Corvette. I just finished a trip with her up the coast to Machias Port, and am back home dry and tired.
This is a modified version of a T.L. Simmons 18′ sea skiff.I used marine plywood sides instead of Lapstrake. I use the boat in the 10,000 Islands and in the Atlantic. Very seaworthy and tough.
This is my new launch Cirrus Greenland style kayak - 17′ 2″, 43lbs — stitch and glue mahogany and ribbed poplar with cherry and Spanish cedar accents, blackened epoxy seams, strengthened with carbon fiber in high stress inner deck and hull areas, and has rare earth magnetically sealed hatches fo
This design from CYD 4710 for Lorenzato’s family build from Cantiere Alto Adriatico. It’s very innovative in the layout and is the first of a series with this type for the same yard, with two separate cabins: one forward and one aft, with the dinette and living in the middle of the boat.
Here is another little skiff inspired by a Chesapeake Bay working craft.
Mark McGinley built this Iain Oughtred design 7 1/2′ Auk “ELSIE KAY” from Okoume plywood as well as locally cut Quarter sawn oak, ash, and pine. She is the tender for his Pacific Seacraft PS-25 located in the Apostle Islands area of lake Superior.
Ben David bought a set of plans for the Redwing 18 from Karl Stambaugh. He built the 18′ 6″ boat from marine plywood, glued and screwed, covered with fiberglas, and then gelcoat. Ben launched her in July 2011 and moors her at Jeddore Harbour in Nova Scotia, Canada.