Plans & Kits

Offshore cruising catamaran

The TRICKY FIVE has been conceived for a precise scope: to realize a boat, which in relation to its size would maximize the ratio between speed and cost. This means that for a determined cost for materials and hours of construction required, it would be the fastest possible.

Good speed and sea keeping ability with low impact & noise. 50hp outboard or inboard diesel.

Tandem Row & Sail | CartoppableSpecifications:

• Overall Length 14′ 4″
• Waterline Length 10′ 10″
• Beam 48 1/2″
• Draft (board up/down) 5"/27″
• Depth amidships 14 3/4″
• Bare hull weight 115 lbs

Roberts SPRAY 22 trailerable cruising sailboat you can build in wood epoxy using the plans and full size frame patterns.

“Breeze” is a 10′ (3m) double paddle canoe. Two sheets of plywood needed. Stitch and glue construction using 3″(75mm) fiberglass tape in epoxy for all seams inside and out. The deciding factors when designing the boat were mostly the same as with all my designs - seaworthiness and lightweight.

Athelas is a 17'-2" open water recreational rower for one or two based on a lines sketch by N. G. Herreshoff. Built from 6 and 9 mm glued lapstrake plywood, she weighs 81 pounds and can be cartopped

A small daysailer/cruiser with berths for two. Construction: Plywood planking over sawn frames. Lofting is required. Plans include 8 sheets.

The F1430 is a unique sit-on-top stitch and glue kayak.

The Sharpie Cat 42 is a new catamaran design from a regular WoodenBoat contributor, author and marine architect Reuel B. Parker. She is a fast cruising cat with accommodations for eight in four cabins.