Plans & Kits

Sit On Top, Stitch and Glue kayak

GT stands for Grand Touring and that is just what this kayak delivers.

Full-sized patterns for molds, so lofting is not required. Construction: Carvel-planked over steamed frames. Alternative construction: Lapstrake or strip. Plans include 4 sheets.

Simple sheet plywood sports rowing boat, stitch and tape construction. As easy to build as it gets!

NEREIDE is the classical canoe used on lakes or rivers of North America. For the last two centuries it has been built with very slight differences in shape, which is in itself a guarantee of quality.

Design Specs:
Flat Bottom
Open Boat
LOA. 17′-3″ (5.2m)
Beam 6′ (1.8m)
Weight 450 lbs (204 kg)
Material Plywood, Hard Wood
Fiberglass, Other.
Recommended hp. 25

Keel/centerboard cutter designed by Edward Burgess in 1888 and first of his “Compromise 40-footers”.The plans produce a model that is 25″ long.You’ll receive 4 pages of plans historical information about the boat and step-by-step instructions for half-hull building,using the lift method.There are

The Champlain is a good traditional style general purpose recreational canoe.

An outboard skiff with a wide bottom and moderate rocker that contribute to stability and the ability to carry weight back aft.

• Construction: Cross-planked bottom, lapstrake sides
• Alternative construction: Plywood or glued-lapstrake plywood
• Lofting is required

This rugged and able outboard-powered dory combines beauty with practicality and is easy to build.

Construction: Plywood planking over sawn frames.

Lofting is required.

Plans include 3 sheets.