If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
A fine outboard, smooth riding, seaworthy, and rugged. 40-120hp outboard.
This design was inspired by Ross Lillistone’s “Water Rat”. The bow transom was replaced by a pointed stem. Also the internal volume and from there the displacement of the boat were increased by about 20%. Changes were made to the seating arrangement as well.
The Sparrow Hawk is proportionally downsized for the smaller paddler.
The Matunuck is a surf kayak designed by Nick Schade to be comparable with the best carbon-fiber surfyaks on the market.
Light, lapstrake-planked open canoe for sailing or double-paddling. Construction: Lapstrake planking over steamed frames. Lofting is required. Plans include 4 sheets.
At 14 feet this is Riva’s only outboard powered design. Originally designed in the 1950s, only some 150 were ever produced.
The Great Alaskan is a very versatile inshore/offshore powerboat with a seaworthy semi-dory style hull. These fiberglass/wood stitch-n-tape boat plans give the builder the freedom to adapt the cuddy, pilothouse, and cockpit layout to his preference.
MANDOLINO is an elegant, classical seaworthy small boat that we propose in two versions, one for day-sailing and one for cruising.
“Breeze” is a 10′ (3m) double paddle canoe. Two sheets of plywood needed. Stitch and glue construction using 3″(75mm) fiberglass tape in epoxy for all seams inside and out. The deciding factors when designing the boat were mostly the same as with all my designs - seaworthiness and lightweight.
Designed for a boat owner who wanted a rigid tender for his 24’ meter yacht, PRAM 220 has the minimum dimensions to be used at this scope. It may be used by children for sailing in protected waters.
Professionally-built of mahogany on oak, ‘Debonair’ has been lovingly maintained and extensively
A complete hull rebuild in 2014, coupled with a low hours Yanmar engine and continuous maintenanc
I built this boat in 2019, never used. Bill Thomas design. Price $2,500.
