Plans & Kits

Short handed cruiser-racer

Kingfisher’s shape was inspired by famous Chestnut Prospector. Hull width of 93cm, flat bottom and slim shape gives good stability and maneuverability. It is designed for crew of 2 with additional equipment (tents, fishing rods…).

This V-bottomed daysailer can be shallow or deep drafted and is easily sailed.

Construction: Batten-seam planking over steamed frames

Alternative construction: Plywood

Lofting is optional.

Plans include 6 sheets.

Meghan has a constant deadrise V-bottom hull with  a capacity of 1-2 passengers and features for & aft flotation chambers. Her rig consists of a 16ft free standing mast, 9′5″ wishbone boom and 65 square ft sail.

SAM is a pure racing boat built in composite with the sandwich technique. A prototype of this boat got a good result in World Championship of the class same years ago.

Test the Arctic Hawk on the worst conditions and you will find it at its best.The Arctic Hawk is a medium volume, touring kayak which recreates the legendary West Greenland kayak in today's material and technology. The West Greenland design was bred in adversity and perfected in storm and ice.

Construction: Glued lapstrake plywood.

Alternative construction: Traditional plank, cold molded and strip plank.

No Lofting required.

Plans include 10 sheets.

Kiska is a wood strip/epoxy single kayak. Based on Greenland kayak lines, this low volume kayak is playful but tracks well

“Trixie” began as an idea for a small and simple to build plywood tender, able to get out to a mooring with two or three on board, that was very light, incorporated wheels to enable transport to the slipway, was designed to provide the maximum space from two sheets of 1/4″ plywood, and could be p

The 16' Prospector features a flattened, shallow arch hull with its fullness carried into the bow and stern, good depth amidships to maintain freeboard and deepened ends to keep paddlers and gear dry.