Plans & Kits

A 16' Classic Plywood Runabout

NEMAH features a stable, flat bottomed, sharpie type hull that can handle up to 3 passengers and a small outboard up to 5hp. Sides are ¼” plywood and the bottom is 3/8” plywood. A trussed gunnel rail insures hull stiffness.

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick.

The Crystal 16 was designed to be a simple, lightweight flats skiff. Her hull is a simple V-bottom with a bit of flare in her topsides. Her deck features a large casting platform forward with two smaller platforms back aft on both sides. Storage is available up forward below the casting deck.

Our Talon Series boats are designed to handle good seas with speed and comfort. We use a 30 degree dead rise found on production speed boats to make a soft ride.

Start Building ... Get Floating!!

The Sea Island Sport is CLC’s response to hundreds of requests for an attractive stitch-and-glue sit-on-top kayak. Credit for the design goes to Nick Schade.

Techne is a pure double trapeze skiff, fast, exciting and for amateur boat building.

Developed in response to requests from heavier and wider paddlers who also wanted a shorter boat, this stable load carrier is excellent for the novice kayaker.

Rustica 570 is a cabin motor boat ideal for coastal cruising and camping. It’s particularly suitable for river tourism in protected waters. The shallow V hull, semi-displacement, is designed for an outboard motor hosted inside the cockpit with a power range between 10 HP and 15 HP.

Construction - Glued lapstrake clinker plywood.No Lofting required.Plans include 8 sheets with photocopies of Classic Boat building series.Sail Area - 53 sq. ft.