Plans & Kits

The Osprey 18 is a simple, lightweight flats skiff.

4.80 m Plywood stitch & glue touring canoe. Only two plywood sheets are needed!

Construction: Glued lapstrake plywood. Alternative construction: Traditional planking, cold molded, strip plank, epoxy-fiberglass. No Lofting required. Plans include 5 sheets.

Based on the Donzi Sweet 16, this little treasure boasts a generous deep V at the transom allowing for smoother running and bad weather handling.

The boat is nice to row - a good combination of tippy enough for an intermediate, yet after a few days a novice will get the hang of it.

Keel/centerboard cutter designed by Edward Burgess in 1888 and first of his “Compromise 40-footers”.The plans produce a model that is 25″ long.You’ll receive 4 pages of plans historical information about the boat and step-by-step instructions for half-hull building,using the lift method.There are

FALCO singlehanded skiff

The project of Acyd 950 was born on the regulation of “class 950”.These boats have an extremely light weight and high performance and they can safely be used on a cruise.The remarkable minimum lightness is only 2700kg and it is compensated by the strong bulb elongation that carries the maximum dr

Parker Marine Enterprises—Sea Bright 38Length Over All: 37′ 11”Beam: 10′ 6″Draft: 2′ 4″Displacement: 9,500 lbs, half-laden (approximate)Power: Yanmar 4JH4HTE (110 hp int/99 hp cont)Water: 200 gallonsFuel: 200 gallonsAccommodations:  Sleeps four in double V-berth and two settee berths.

Oceangoing carvel-planked cruiser with a choice of centerboard or ballast keel configurations.

Construction: Carvel planked over sawn frames.

Alternative construction: Strip.

Lofting is required.

Plans include 7 sheets.